DP Detailing Products Ultimate Wash-n-Wax
- Item #:
The perfect pair in one product!
Wash-and-Wax has a pH-balanced formula, so it is safe on your surface without causing adverse effects. DP Wash-and-Wax rinses your car cleanly without leaving streaks or spots. Plus, the wax component protects your surface and boosts any additional protective products on your surface.
RINSES AWAY CLEAN! That means no streaking or spotting! DP Wash-and-Wax cleans your car, just as a car wash should.
It has a pH-balanced formula, that is engineered to clean the car's surface of dirt, dust and other environmental contaminants. It then washes away cleanly, without streaking or spotting.
BOOSTS! If you already have a coating, wax or sealant applied, this product will enhance it even more!
The waxing portion adds a layer of protection to your surface, even on top of any existing waxes, coatings or sealants, even enhancing the original protection. When it protects, it will add a layer of hydrophobicity!
- Make sure you are working out of direct sunlight.
- You're going to have to do some math here Mix 1 oz. of product per 128 oz. of water in a 5-gallon bucket.
- Once you have the correct amount of product and solution in the bucket, stream a strong jet of water into the bucket.
- Begin washing your vehicle using best practices. This includes using the correct, clean microfiber towels and wash mitts. Wash the car from top to bottom.
- Do not let the solution dry on surface, rinse and dry thoroughly after washing.
Detailer's Pro Series safely washes your vehicle when you can't use a traditional car wash. Use two buckets for maximum paint protection.
Rinseless Wash - Dilute 1 ounce of super-concentrated Detailer's Pro Series Rinseless Wash & Gloss in TWO gallons of water.Soak a microfiber towel or sheepskin mitt (any paint-safe wash tool will work) in the mixture and wash the vehicle one section at a time. Re-wet the towel or mitt as needed. Note: Use the two-bucket method to further protect your vehicle from wash-induced swirls. Rinse the wash tool in a bucket of clean water before re-wetting it in the wash bucket. Dry each section with a second clean microfiber towel.
Water Conditioner - Add 1-2 ounces to 3-5 gallons of wash water for additional lubrication. Wash and rinse as usual.
Clay and Foam Pad Lubricant - Mix 1- 2 ounces of DP Rinseless Wash & Gloss with 32 ounces of water. Pour the solution into a clean spray bottle. Mist a foam pad prior to applying products with your polisher, or mist the vehicle prior to being clayed. With either use, DP Rinseless Wash & Gloss acts as a slick lubricant to protect your vehicle from micro-marring and swirls.
Quick Detailer - Add 2 3 ounces of DP Rinseless Wash & Gloss to 32 ounces of water. Pour this mixture into a clean spray bottle. Mist the paint surface and wipe with a clean, soft microfiber towel to rejuvenate the shine and remove fingerprints and dust. The remaining mixture can be saved for use at a later time. Shake the bottle well before using the quick detailer again.
If you're looking for a cleaner that can be sprayed on and wiped off, take a look at DP Waterless Auto Wash. It requires no dilution and is excellent for quick cleaning when you're away from home. All you need is a Cobra microfiber towel to wipe away dust, fingerprints, and fresh bird droppings.