Buff and Shine 5.5 Inch Flat Foam Pads
Buff and Shine is a leading manufacturer of a complete line of high-quality foam buffing pads suitable for use with your favorite rotary or dual action machine polisher. Buff and Shine 5.5 inch foam buffing pads are the ideal Buff and Shine pad for use during compounding polishing, and waxing projects. Their thin design makes Buff and Shine 5.5 inch foam buffing pads easier to control during machine buffing. Buff and Shine 5.5 inch foam buffing pads are composed of a combination of advanced foam materials including Euro prepolymer and reticulated polymer foams. This winning combination ensures that you get the right cut and finish for each individual project. Each foam composition has been extensively tested so that each cutting, polishing, or finishing pad from Buff and Shine will deliver consistent results every time. Each Buff and Shine 5.5 inch foam buffing pad is only one inch thick, making them the ideal choice for use with dual action polishers that utilize a free-floating spindle bearing assembly. Since all dual action polishers utilize this system, excessive downward pressure will stop rotation. These thin pads have less mass than the competition and rotate more easily! If you frequently polish your vehicle (or anyone else's!) you may have noticed that some buffing pads have sidewalls that are concave and uneven. Buff and Shine 5.5 inch foam buffing pads are manufactured with the industry's highest quality control standards, so each pad is cut perfectly straight. Even the Velcro backing is trimmed back from the outer edge to reduce the possibility of contact with the paintthat's dedication to quality! And don't worry about the Velcro getting looseBuff and Shine uses a high-strength, heat and chemical resistant adhesive that will never come off. Buff and Shine 5.5 inch foam buffing pads are compatible with all dual action and rotary polishers equipped with a 5 inch backing plate.