|Preserve surface gloss while
removing noticeable paint defects ? it is possible with
McKee’s 37 FC-717 Swirl Remover.
Swirl removal doesn't require large abrasive particles or
an aggressive machine. The truth is that a product loaded
with correctly milled, smaller abrasives will do the job
with less damage to the paint, thereby shaving a couple of
steps off your detailing process.
McKee’s 37 FC-717 Swirl Remover is the most
aggressive swirl remover in the McKee’s 37 Series, yet it's not a
heavy compound. This swirl remover is designed to correct
paint flaws by gradual smoothing, not grinding down the
paint. Typically, compounds leave more problems than you
started with and it takes several more steps to restore
smoothness and gloss. McKee’s 37 FC-717 Swirl Remover
takes a less invasive approach to preserve the paint while
it corrects the finish.
First, do no harm. McKee’s 37 FC-717 Swirl Remover works on the principle of doing only what's
required to restore the damaged paint. Precisely milled
abrasives - and a lot of them - blend away moderate to
severe blemishes without removing significant
layers of clear coat. Since clear coats are extremely
thin, these Concentrated Micro Abrasives preserve as much
of the paint as possible while removing only the defect.
Lose the swirls, keep the gloss. Even though McKee’s 37 FC-717 Swirl Remover is less abrasive than a
traditional compound, it removes the same imperfections:
moderate to severe swirls, moderate scratches, oxidation,
water spots, and overspray. The abrasives gradually
diminish as they work, giving you a built-in
finishing polish. The paint will experience little
or no loss of surface gloss. In most cases, you will not
need to use a separate finishing polish.
Keep it real. There are some scratches that can only be removed
by a professional. If the scratch extends all the way to
the color coat, removing the scratch requires removing the
entire clear coat surrounding the scratch. Unless you
intend to repaint the vehicle, this is an impractical
solution for at-home detailers. McKee’s 37 FC-717 Swirl Remover is formulated to remove
blemishes without jeopardizing the paint system. It's a
real world approach to at-home paint care. McKee’s 37 swirl
removers give you the best finish possible with none of
For those blemishes that can't be removed, McKee’s 37 FC-717 Swirl Remover will dramatically improve
their appearance. Conceal them with McKee’s 37 Jeweling Wax as your final step product.
All McKee’s 37 Series products were formulated in sunny South
Florida, the home of Pinnacle Natural Brilliance. Intense
heat and humidity are constant challenges here. That's why
all McKee’s 37 products were created to work as promised in the
sun or shade.
Pinnacle is dedicated to preserving your vehicle and the
environment. McKee’s 37 FC-717 Swirl Remover
is VOC compliant, body shop safe, silicone-free, and clear
Apply McKee’s 37 FC-717 Swirl Remover with a light
cutting pad on your dual action polisher. Set the maximum
speed to 5000 or 5500 OPM. Pour a
quarter size amount of the product onto the pad and spread
it onto a section of paint. Turn the polisher on and work
the swirl remover into the paint until it begins to dry or
disappear. McKee’s 37 FC-717 Swirl Remover contains
no fillers so you can see the results of your work. Buff
with a Cobra microfiber towel.
Paint flaws are only skin-deep. Remove moderate
imperfections without removing surface gloss with
McKee’s 37 FC-717 Swirl Remover.