Pinnacle Black Label Compound

Bring your paint up to Black Label standards!

Pinnacle Black Label Compound provides heavy cutting abrasive technology to easily remove swirls and scratches impairing you paints finish. Pinnacle Black Label Compound easily removes sanding marks up to 1,000 grit, so needless to say, it has the power to remove the imperfections that are clouding your paints beauty.

Paint imperfections such as swirls, scratches, water spots, and oxidation can be difficult to remove using just a polish. Moving to a compound entails dealing with product dusting and marring left behind from the harsh abrasives. Pinnacle Black Label Compound avoids some of these common problems with a high lubricity content. The surplus of lubricants packed into Pinnacle Black Label Compound prevent dusting normally seen in compounds of this strength and also reduce the effects of marring. This leaves a smoother finish that can easily be perfected with Pinnacle Black Label Polish!

Directions for Use:
Black Label Compound can be used by hand or by machine, but for best results, use with a machine polisher. Do not apply in direct sunlight. Be sure the surface is fully washed and dried before compounding.

For use by hand: Apply three nickel-sized drops of product to a foam hand polishing pad and work in a back and forth, overlapping motion until product starts to dry. Wipe polish away using a clean, dry microfiber towel. Continue around vehicle.

For use by machine: Apply three nickel-sized drops of product to a foam cutting or polishing pad and using medium pressure on one panel at a time, work the product into the surface using a back and forth, overlapping motion. When product begins to dry, check your work and repeat if necessary. For best results, follow up with Pinnacle Black Label Polish.

8 oz.