BLACKFIRE Pro Ceramic Coating Wash - 32 oz.

Care for your coating like a pro!

BLACKFIRE Pro Ceramic Coating Wash is the ideal product to maintain the beauty of your coated vehicle. While this is a perfect match for working with the BLACKFIRE Pro Ceramic Coating, it works with any ceramic coating available! The BLACKFIRE Pro Ceramic Coating Wash produces a thick, pH-neutral suds designed to remove any surface contamination without degenerating the coating itself.

Investing into a ceramic coating is more than just picking a protectant. Aside from the larger cost of the product, it's a more complex install. If you only factor the amount of time it takes to correct, prep, and install the coating, you'll want to be sure you are caring for it properly! BLACKFIRE Pro Ceramic Coating Wash is formulated for this very task. The high lubricity content safely encapsulates dirt and easily removes it from the surface, without causing any harm to your finish. BLACKFIRE Pro Ceramic Coating Wash is pH-balanced to ensure that the only thing that is stripped off your vehicle is dirt!

Directions for use:

• Work out of direct sunlight.
• Mix up to 2 oz. of Coating Wash with 3-5 gallons of water and activate with a strong jet of water.
• Starting at the top of your vehicle and working down, use a clean wash mitt to remove surface contaminants.
• Rinse frequently and do not allow product to dry onto surface.
• Using best practices, dry vehicle after wash using a drying towel or car dryer.

32 oz.