Everyone needs a quick pit stop!
P&S Off Road Pit Stop All Purpose Quick Detailer provides you with an opportunity to stay clean on every adventure you take! This versatile, easy-to-use quick detailer can be used on both matte and gloss paints wherever you can pull over for a pit stop. P&S Off Road Pit Stop All Purpose Quick Detailer uses lubricants and cleaners to safely remove light dirt, dust, fingerprints, and smudges from your paint. That’s not all it does either. P&S Off Road Pit Stop All Purpose Quick Detailer is formulated with UV inhibitors that leave a layer of UV protection after every wipe. Boosting protection and enhancing gloss with every application. And better yet, P&S Off Road Pit Stop All Purpose Quick Detailer can be used as a clay lubricant or drying aid. P&S Off Road Pit Stop All Purpose Quick Detailer can even be used on interior surfaces!
Directions For Use:
A quick detailer is formulated with lubricants and gloss enhancers to quickly remove light dust, dirt, fingerprints, and smudges from the paint. Typically used as the “final touch” after washing a vehicle that is already protected. In most cases, the quick detailer will contain UV inhibitors designed to boost the underlying protection. Quick detailers are also commonly used as drying aids for sensitive paints or as clay lubricants during the decontamination process.
No, the quick detailer won’t cause scratches, but they can result from the process if not done correctly. Additionally, soft paintwork is also more susceptible. Before using a quick detailer, inspect the level of dirt or contamination on the paint. Quick detailers are only designed for light to moderate amounts of contaminants. Anything more than that it would be best for a traditional wash. Using plenty of the proper towels and a safe amount of product is best practice. To learn more about this process check out our detailed guide!
Yes, you can. It is a great recommendation too! Any time you physically touch the paint, even with a soft microfiber towel, you run the risk of causing light scratches. Every vehicle and paint type is different so the risk of causing marring can vary. Using a quick detailer during the drying process helps mitigate that risk and will help you produce an even glossier finish!