Meguiars Hybrid Ceramic Trim Restorer - 16 oz.

Give your trim the protection of SiO2!

Meguiar's Hybrid Ceramic Trim Restorer breathes fresh life into old, faded trim. Make no mistake, this isn't an oil or dressing that will wash off next time it rains. Using advanced chemistry and SiO2 technology, Meguiar's Hybrid Ceramic Trim Restorer restores trim while leaving a durable layer of protection to seal in that like-new look. The SiO2 additive is able to withstand washing, rain, and harsh ultraviolet rays. Meguiar's Hybrid Ceramic Trim Restorer can be used on unpainted plastic, vinyl, and rubber trim such as bumpers, moldings, door handles, rearview mirror housing, and even windshield cowlings.

Will Meguiar's Hybrid Ceramic Trim Restorer bring back faded trim?

Yes! If you're looking to restore the natural luster of your exterior plastics, Meguiar's Hybrid Ceramic Trim Restorer has you covered. This isn't a dye or oil, it's a blend of SiO2 that creates rich new appearance without the oily or greasy finish.

Does Meguiar's Hybrid Ceramic Trim Restorer prevent trim from fading?

Yes! Meguiar's Hybrid Ceramic Trim Restorer uses SiO2 to resist UV damaged that causes plastic to fade. This main component, which is the active ingredient in most ceramic coatings, provides ample protection power to keep you trim looking its best. Plus, Meguiar's Hybrid Ceramic Trim Restorer dries to the touch and won't wash away next time it rains.

What can I use Meguiar's Hybrid Ceramic Trim Restorer on?

Meguiar's Hybrid Ceramic Trim Restorer can be used on unpainted exterior plastic and vinyl, such as trim pieces, moldings, door handles, bumpers, mirror housings, and windshield cowlings. Meguiar's Hybrid Ceramic Trim Restorer can be used to enhance the look of all these exterior plastics as well as protect them from future damage!

How to restore faded plastic with Meguiar's Hybrid Ceramic Trim Restorer

1. Dispense a quarter-sized amount onto an applicator pad or towel.
2. Work product evenly onto one section of the exterior trim at a time.
3. Allow product to dry for 5-10 minutes (the longer the product remains on the surface, the darker the appearance)
4. Wipe off excess with a microfiber towel.

PRO TIP:

Severely oxidized surfaces benefit from 2-3 applications as addional applications of the product can improve darkness. If product gets on paint or glass remove with a clean microfiber towel.

16 oz.