Use foam buffing pad technology without using a buffer!
These imported foam applicators utilize CCS Technology™, just like machine buffing pads. CCS pockets, as you can see in the photo, cover one side of each applicator. The pockets create spaces for excess polish to accumulate – without soaking into the foam – until it is needed on the work surface. Then the polish is drawn up through the center dimples of each CCS pocket and onto the applicator’s work surface. This design saves product because the CCS pockets significantly reduce product absorption.
Cutting Applicator – The orange foam is the most popular type of
foam used in making buffing pads. It has a texture like memory foam but
denser. It can be used to remove light to moderate swirls with little or no
loss of surface gloss.
Applicator – For general polishing and pre-wax cleaning, we
recommend the white polishing foam. This is one of the most versatile foam
compositions. Use it to apply finishing polishes, pre-wax cleaners, and all
in one products.
|Red Ultra Soft
Finishing Applicator – The red foam is designed specifically for
the application of waxes, sealants, and glazes. It has no cut or cleaning
ability. The soft foam will not leave any haze and it is gentle on all
automotive surfaces. Use the red foam applicator with any last step product
to product a smooth, flawless finish.
Gold Jewelling Applicator - Use the gold pad to apply a very fine polish or glaze as the final step of the polishing process. Jewelling is the term coined for this step because it intensifies gloss and reflectivity, like a jewel. The gold foam pad also works well for wax and sealant application.