Everything you need to apply Polish Angel's patented German coating system.
With so many two-part sealant systems on the market today, it can be difficult to decide which one is right for your vehicle. Polish Angel Glasscoat Cosmic V1 when paired with Polished Angel Glasscoat Primer takes all the guesswork out of the two-part coating process. In just two simple steps, you can blanket your vehicle with unmatched protection and insane shine that lasts up to two years!
Polish Angel Glasscoat Cosmic V1 combines the durability and shine potential of silica (SIO) and titania (TiO2) to radically increase the durability and corrosion resistance of the coating. Once treated with Polish Angel Glasscoat Cosmic V1, your vehicle will be resistant to scratches, swirl marks, water spots, bird droppings, sap, road grime, and just about any other environmental contamination that it faces on the roadways. The finish remains flawless, crystal clear, and incredibly shiny for upwards of two years. If you want to protect your vehicle with a two-part system, look no further than Polish Angel Glasscoat Cosmic V1 coupled with Polish Angel Glasscoat Invincible Primer.
Polish Angel Invincible Primer contains no fillers, providing a pure, true finish after application. This versatile formula is effective when applied by hand or using your favorite dual action polisher – the amount of cut is determined by your pads, tools, and technique! The dust-free formula wipes away with ease once worked over the surface, leaving nothing behind but a smooth, glossy surface ready for sealant application.
Get your vehicle’s paint ready for the Cosmic treatment with Polish Angel Glasscoat Invincible Primer.
Work on a clean, dry vehicle out of direct sunlight. Ensure that the surface is cool to the touch.
Be sure that all defects in the paint have been removed prior to application, as any remaining defects will be sealed into the surface.
Shake product well prior to use.
IT IS IMPERATIVE THAT THE SURFACE BEING COATED IS TREATED WITH POLISH ANGEL GLASSCOAT INVINCIBLE PRIMER PRIOR TO APPLICATION. THIS ENSURES THAT PROPER BONDING WILL OCCUR. APPLY THE FIRST COAT OF COSMIC WITHIN 9 HOURS OF USING INVINCIBLE PRIMER.
Use the included applicator for hand application or a dual action polisher equipped with a foam finishing pad to apply a small amount of Polish Angel Glasscoat Cosmic using light pressure and small, circular motion.
Allow the first coat to cure for 30 minutes, then buff with a clean, dry microfiber towel.
After two hours, apply a second layer in the same manner.
Keep the surface away from heat and water for 12-24 hours to allow proper curing.
Note: An Infrared heat lamp can be used to expedite cure time to 6 hours. If an infrared lamp is used, the surface temperature should be 35°Celcius and the lamp should be utilized 15 minutes after application and within 15 minutes after removing residue.
When using Polish Angel Glasscoat Cosmic on plastic and rubber surfaces, buff off is not required. Simply apply an extremely thin and even coat to the surface.
Polish Angel Glasscoat Cosmic V1 50 ml.
Polish Angel Glasscoat Invincible Primer 50 ml.
Polish Angel Glove Bag