P&S Iron Buster Wheel & Paint Decon Remover - 128 oz.

Item Description:

Dissolves iron and other ferrous contamination.

Changes to purple when dissolving contamination

Formulated without the use of harsh acidic chemicals

Safe for use on paint and most wheels!

Bust through brake dust and ferrous contamination!

P&S Iron Buster Wheel & Paint Decon Remover is the solution to frustrating ferrous contamination. Just spray P&S Iron Buster Wheel & Paint Decon Remover on the surface and let it do all the “busting” for you. Which is especially useful when it comes to wheels! Once P&S Iron Buster Wheel & Paint Decon Remover is on the surface the pH neutral formula will immediately start dissolving any metal contamination. You can watch this process as it happens! The yellow color of P&S Iron Buster Wheel & Paint Decon Remover starts to change to purple as it removes.

DECONTAMINATES! Removes embedded ferrous contamination from your paint!
From industrial fallout to rail dust, most cars on the road today are traveling with extra metal on their paint. P&S Iron Buster Wheel & Paint Decon Remover easily removes this be chemically breaking down metal contamination to be rinsed away easily.

CLEANS! Cut through heavy brake dust without even lifting a brush!
Stop trying to scrub your wheels clean and reach for P&S Iron Buster Wheel & Paint Decon Remover! Brake dust is technically and abrasive, and when you scrub your wheels, you’re only instilling scratches in the surface. P&S Iron Buster Wheel & Paint Decon Remover breaks down brake dust letting you wash you wheels clean with little to no agitation required

SAFE! Formulated to be harsh on contamination and nothing else!
You won’t find any harsh, acidic chemicals in this bottle! P&S Iron Buster Wheel & Paint Decon Remover is a pH neutral formulation making it safe for use on just about any car that rolls up. And, you don’t have to worry about power either. P&S Iron Buster Wheel & Paint Decon Remover is no a compromise formula!

DIRECTIONS:

  • When using on paint, wash, and dry surface prior to product application for maximum effectiveness.
  • Once the surface has been prepared, spray a generous amount of Iron Buster to the paint and/or wheels.
  • Allow product to dwell for 2-5 minutes.
  • Do not allow product to fully dry on surface.
  • Rinse thoroughly with water, using a hose or pressure washer.
  • Repeat process if necessary.

*Important: Spot test on all wheel surfaces prior to application to avoid possible risk of staining or damage.

128 oz.

Top