Menzerna Heavy Cut Compound 1000 128 oz.

Item Description:

The Power compound that finishes with Gloss!

Uses clustered aluminum oxide to terminate deep imperfections quickly.

Removes up to 1200 grit sanding marks on fresh paint.

Can be used with a dual-action orbital or rotary polisher.

Menzerna Heavy Cut Compound 1000 uses aggressive clustered aluminum oxide abrasives to terminate 1200-1500 grit sanding scratches, acid rain damage, water spots, and isolated scratches with ease. As the clustered oxide abrasive break down they act to polish the paint to a higher gloss then typically achieved with other compounds.

Body shops have come to rely on Menzerna Heavy Cut Compound 1000 to speed up the buffing process while improving the paint quality of the finished vehicle. Efficiency is further enhanced due to reduced dusting (for a compound) and minimal slinging reducing clean up time considerably. Power Gloss will safely restore the luster on aged; weather worn and oxidized paint and clear coat. Scratches and heavy swirl marks are eliminated and not hidden since there are no fillers in the formulation. The high concentration of finely milled diminishing size aluminum oxide powder work perfectly with either a wool or foam compounding pad.

Use Menzerna Heavy Cut Compound 1000 to remove heavy scratches, wet sanding marks, and acid rain blemishes quickly. While this compound produces a nice finish for a compound, resulting swirl marks will require 1-2 additional polishing steps for a flawless finish. Recommended for use with a rotary polisher and your choice of wool or cutting foam pads.

Note: Can be used with a random orbital polisher although some visible hazing of the paint will occur.

128 oz.

People who purchased this product also bought:

Forced-Rotation Dual Action Polisher
$435.99
10 Reviews
$29.99
3 Reviews


Product Reviews

4.5
2 Reviews
5
50% (1)
4
50% (1)
3
0% (0)
2
0% (0)
1
0% (0)
100% Recommend this product (2 of 2 responses)
By J H.
Mansfield OH.
J.R.Hill- owner- custom motorsports painting
January 26, 2014
PG -1000 is the best finish product I have used to buff with for final cut buffing...cuts well and leaves very little if any swirl marks and very little powder. Makes finish polishing easy.............
By Andrew S.
SF Bay Area
I use Power gloss for rubbing out freshly painted cars
December 8, 2012
have used many cutting polishes to bring the gloss back after I wet sand cars I have painted. So far, this works the best. Can remove 1000 grit scratches with a foam polishing pad. doesn't leave heavy swirl marks. If you are patient, can really get the surface to look like glass.
Prosstrong initial cutting action, breaks down to a finer polish so it doesn't leave a ton of deep swirl marks.
Conssometimes the fling can leave small marks on the surface of adjacent panels that have already been polished. they will polish out though.
Top