Optimum Ultra Clay Mitt

Optimum Ultra Clay Mitt Discontinued

The Optimum Ultra Clay Mitt provides the ability to wash and clay in one simple step. Paired with Optimums No Rinse, you can clean and decontaminants in a fraction of the time it normally takes!

There is no need simplicity needs to stop there. Only two sprays per panel is all that is needed to protect you paint with Optimum Car Wax!


  1. Wash vehicle to remove loose dirt and debris.
  2. Spray Optimum No Rinse (2 oz to 1 gal) on a small section of the vehicle. (Alternatively, you can use Optimum Instant Detailer or Car Wax.)
  3. Gently rub Optimum Ultra Clay Mitt over the lubricated area until contaminants are removed and surface is smooth. Wipe area with an Optimum Microfiber Drying Towel. Continue in sections until vehicle is fully decontaminated.
  4. Follow with Optimum Car Wax, Optimum Polish, or Opti-Seal.

Prior to initial use rub Optimum Ultra Clay Mitt on glass using clay lubricant. Inspect surface of Optimum Ultra Clay Mitt before and during use. To clean the clay surface, spray clay surface with lubricant and wipe gently with hand. After repeated use, or if too much contamination is present, discard and use a new Optimum Ultra Clay Mitt.

For best performance:

  • Do not soak in liquid.
  • Do not squeeze or wring out.
  • Do not store laying flat on clay media surface.
  • Do not store wet in air tight containers.

Package contains (1) 11" x 7" mitt