Gentle, yet fast cleaning action for delicate and dark paints!
Works with a DA polisher to reduce claying time significantly
Lasts up to 4 times longer than clay bars
Washable and reusable, you can even drop it on the ground
The Nanoskin AutoScrub 6” Fine Grade Foam Pad turns your Random Orbital DA Polisher into a gentle paint cleaning tool! Spend less time and effort getting the showroom finish you deserve! The Nanoskin AutoScrub 6” Fine Foam Pad uses the latest advanced rubber polymer technology to replicate the paint cleaning action of a fine grade clay bar while taking advantage of time saving ability of a machine polisher. The result is perfectly clean paint, ready for polishing or waxing, without breaking a sweat!
Shortly after leaving the factory, your vehicle is bombarded with airborne pollutants and contaminants that ruin the smooth feel of paint, limit its shine, and prevent waxes and paint sealants from bonding properly. In the old days, body shops and detailers would use aggressive compounds and a wool pad to clean the paint. Next, natural and synthetic clay bars where developed to clean contamination and overspray. Detailing clay is still the tool of choice, and for good reason. You can clean your paint without damaging it, unlike the compounds of yesterday.
The Nanoskin AutoScrub 6” Fine Grade Foam Pad is the next generation in gentle paint cleaning. It works much like detailing clay, but with several advantages. It attaches to your Random Orbital DA Polisher the same way a polishing pad does. The fine grade rubber polymer side acts in the same manner as light grade detailing clay, safely removing mild contamination and pollutants. The Nanoskin AutoScrub 6” Foam Pad can last up to four times longer than traditional detailing clay and rinses clean in water. Drop it on the ground? No problem, rinse off and keep working!
Wash and dry your car completely. Attach the Nanoskin AutoScrub 6” Foam Pad to your Random Orbital DA Polisher. Work a section at a time on low speed (1-2) and use light pressure. Mist diluted Nanoskin Glide (or your favorite clay lubricant) on the section and work in overlapping passes until the paint is smooth. Wipe away residue with a soft, clean microfiber towel before moving to the next section.
Note: This is the fine grade AutoScrub Foam Pad, designed to remove light to moderate contamination quickly. For more stubborn contamination consider using the medium grade AutoScrub Foam Pad.
I'm not a professional detailer by any means, but I enjoy taking care of my cars, so take my review for what it's worth. I recently used this nano on my F250. It usually takes forever to clay but I got it done in about an hour. I also used their Glide product and it worked well. I followed the Nano up with Wolfgang sealer and it looked awesome. I would definitely recommend this product if you're looking to save some time.
ConsPad is a little large in places
By bob o.
August 11, 2015
this is a clay bar on steroids. really!!! it was amazing on the paint and very fast. it also worked great on my windshield before putting a sealer on it.
Prosfast and easy and thorough
Where Have Been All My Life
July 17, 2015
This is greatest thing when you need to decontaminate the car. It is so much easier than clay. Now of course due to the size you may need to use the clay for tight spaces, but that is why I I bought the mitt also. Now I know there are traditionalists and professional detailers that will want to stick with clay,, especially on heavily contaminated cars. I can't say how it works on a neglected vehicle. My vehicles don't get that bad so this works great and my hands thank you.
Easier to use
Love at first use
June 12, 2015
Replaced clay for large areas and cuts decontamination time down to 45 minutes. Still need clay for outside mirrors and small spaces, but I won't be going back to full claying again, ever.
Prosfaster than traditional clay
Lasts longer than clay
Rinses off if dropped unlike clay