Menzerna Heavy Cut Compound 400 8 oz.

Item Description:

Super fast cutting action compound that leaves a high shine finish

Uses ultra-fine abrasives for fast cutting with minimal swirls

Removes up to 1200 grit sanding marks on fresh and aged paints

Can be used with a dual-action or rotary polisher

New label now reads: Heavy Cut Compound 400


Menzerna Heavy Cut Compound 400 is a high performance compound that consists of newly developed abrasives and innovative bonding chemicals. Menzerna Heavy Cut Compound 400 eliminates up to 1200 grit sand marks and other severe paint defects in as little as 30 seconds. The time savings don't stop there! The advanced polishing agents in Menzerna Heavy Cut Compound 400 leave a mirror finish in one step, even when used on dark paints.

Whether you are a professional, enthusiast, or body shop repair worker, you can appreciate a product that works fast and delivers extremely good results. Menzerna Heavy Cut Compound 400 polishes away severe defects quickly. New abrasive technology allows for the fast elimination of sanding scratches, oxidation, and severe paint defects such as the crates caused by acid rain. The innovative abrasive technology also reduces or eliminates the need for a finer polishing step. Advances in binding technology hold the polish together, reducing dusting and creating a more level surface.

Use Menzerna Heavy Cut Compound 400 to remove heavy scratches, wet sanding marks, and acid rain blemishes quickly. Menzerna Heavy Cut Compound 400 creates a high gloss finish that may further be improved on by switching to a fine foam polishing pad. Use Menzerna Heavy Cut Compound 400 with a twisted wool pad for maximum cutting pad, or a range of foam polishing pads to improve finish clarity. Can be used with a rotary polisher or a dual-action orbital polisher.

People who purchased this product also bought:

$435.99
7 Reviews
$39.99
26 Reviews


Product Reviews

4.7
14 Reviews
5
79% (11)
4
14% (2)
3
7% (1)
2
0% (0)
1
0% (0)
93% Recommend this product (13 of 14 responses)
By Don
CORPUS CHRISTI, TX
February 6, 2019
Outstanding Compound
Very good cutting abilities and with a very good finish. Pretty much no dust
ProsGreat cut Great finish Almost no dust Can be bought in smaller sizes
By Jeffrey
Clintondale, NY
April 24, 2017
Woked Great
I am new to detailing so I did a lot of research on all the product on the market. I found that a lot of the pros are using this product so I figured I couldn't go wrong. It does a nice job of removing the swirls in my paint. I followed it with the 3500.
ProsGood results. easy to remove
Cons A little bit of dusting
By Tom
Saratoga, CA
October 5, 2016
Go to cutting compound!
Great cut, fairly easy to remove and only small amounts of dusting. Also delivers a nice long working time! My go to compound for cutting.
By Bobby
South carolina
August 26, 2016
Bobcat
Excellent product cuts great n finishes out nice you can't go wrong with this item
By Yulius
Edmonds, WA
July 30, 2016
One step killer
I've used on my heavily swirled cars and this product proves German engineering. It finishes real nice too and only require polishing on some soft paints.
ProsIt works Finishes nicely
Consnone
By Maria
San Jose, CA
February 19, 2016
Amazing cutting ability
I wasn't having the best results with another compound I was using initially. I gave this a try and it made my life a million times easier. The finish it leaves behind even on a black car is amazing
By Mary B.
Burnsville, MN
January 21, 2016
FG-400
Used this with a yellow cut pad, nice work time, but after several passes with no cut luck just a high gloss, I tried another product which did the trick .
Prosnone for me
ConsStunk soo bad, like gasoline, could not remove the smell from pads so I tossed them.
By Glenn
Fortlauderdale, Florida
October 30, 2015
Idiot proof
I spoke with tech support about my lack of experience with a machine(DA) and they recommended I try Menzerna FG-400. No matter what I did right or wrong it still came out super glossy. I went back to purchase the larger 32oz. size to use on my other vehicles.
Proseasy to use and clean from pads, little to no dust during or after.
Cons
By Ron H.
Burlington,NC
September 24, 2015
Menzerna FG-400
Have tried many compound and polishing products over many years for auto detailing and have never used a product as good as the Menzerna FG-400. It does as is claimed because it compounds and polishes in one quick step. I use it with my Flex dual action buffer. I go from the FG-400 right to the waxing of the car. Very good product.
ProsEasy to apply and removes with very little effort with a micro fiber cloth. Leaves a very slick surface behind and a clear and very clean paint job even on my black Z51 Vette.
ConsNONE
By Jaime
Visalia, CA
September 8, 2015
Cut and gloss
Cuts great and leaves a great finish. Easy to work. Can be used as a one step products as it finishes so well
ProsEasy to work
By Christopher
Ellenboro, NC
July 1, 2015
Fast cut
I use this when I need heavy cut. It finishes out very good too. Great to use when restoring headlights too
By Allen
Campbell, CA
February 4, 2015
Best of the best
Menzerna is the cream of the crop when it comes to compounds and scratch removal. This is the strongest stuff on the market. Use it for deeply neglected cars.
ProsLittle to no dust Removes the biggest swirls
By Wendell J.
Richmond KY
September 7, 2014
A must have polish
If your a rookie or a Pro you will love this product, easily tackles and removes 1200 sand marks and in some cases higher sand marks....such a easy product to use with quick results that look like you did a 2 step polishing on the paint....leaves glossy almost LSP ready....this is a superb product !!

Below is a 50/50 picture of FG400
ProsFinishes down to almost a LSP, glossy, cut of 1200, fast results, with light dusting too
Consno dislike, I love this
By EVOlved
NYC
September 6, 2014
Can you ask for more in a compound/polish?
I don't think so. This stuff is liquid gold. It can bang out harsh defects even on the hardest of clear coats, then don't blink because your compound did finish that great. As long as you work the compound enough it will finish down good enough for 99% of the population. Just apply 5-6 drops to prime the pad the first time and 3 every other time and you will look like a pro! The pictures are kind of lackluster I am going to post here as it was a test spot but you can see the effects a couple passes with this and a cutting pad can do to some rough defects.
ProsEverything!!!
Top