EASY TO USE
Q2M WaterSpot is very easy to use. Before applying, clean the bodywork with a gentle, pH-neutral HQ shampoo and dry the surface. Then spray directly onto the paint or on a microfiber cloth and wipe the area affected with water spots.If there is strong staining, spray generously directly onto the surface and wipe the surface a few times with an MF. If required - repeat.
Q2M WaterSpot is thick and oily, so very little product is required to cover a large area. It does not diminish or dry fast, so the cleaned area can be wiped multiple times.
BODYWORK & COATING SAFE
The biggest advantage of Q2M WaterSpot is its safety on paintwork. Due to inappropriate maintenance, water spots may become an issue on fresh coatings. You can remove the most undesirable defects by using O2M WaterSpot without the need to polish and in most cases re-apply the quartz coat. Be aware that Q2M WaterSpot might affect the hydrophobic layer of a coating. It's dangerous to leave the product on paint and especially on glass for a long time.