Diamondite Glass Water Spot Remover Gel
- Item #:
Diamondite Glass Water Spot Remover Gel is a thick formula glass cleaner that removes more than just smudges from glass surfaces. Designed to break down dried-on minerals and other contamination caused by hard water, industrial fallout, and even tar and tree sap, Diamondite Glass Water Spot Remover Gel completely cleans the glass surface without causing any further damage. Diamondite Glass Water Spot Remover Gel is also a perfect prep product for use before coating as it will leave no polymers or oils behind!
Achieving crystal clear glass is a true feat of car detailing. One small mis-stroke and you're left with smudged glass that is hard to ignore. But even worse than smudge on glass are hard water spots. Water spots are caused by the drying of hard water on the surface these minerals leave trace remains behind that, if left untreated, can permanently etch into the glass forever. There is a sweet spot of time that these spots can be removed, however, and that's where Diamondite Glass Water Spot Remover Gel comes in.
Designed using a thicker-than-average formula that clings to surface, Diamondite Glass Water Spot Remover Gel allows the user plenty of working time before it is rubbed away ensuring each stain has been properly removed before moving on! Once you've achieved that perfect crystal clear finish, your glass is ready to be coated since Diamondite Glass Water Spot Remover Gel doesn't leave behind any polishing oils or polymers!
Directions for use:
Use only on cool surfaces out of direct sunlight.
- Apply several strips of Diamondite Glass Water Spot Remover Gel onto a microfiber applicator pad and apply to a 2x2 sq. ft. area using a crosshatch pattern and overlapping at each pass this ensures even coverage.
- Allow to dwell for approximately 30 seconds.
- Use a slightly dampened microfiber towel to buff away residue.
- Use a separate dry microfiber towel to dry the surface.
For more severe water spotting, multiple applications may be necessary.