CARPRO IronX Lemon Scent - 500 ml.
- Item #:
IronX is the perfect product to remove stubborn brake dust! After a few minutes of dwell time you will see the chemical reaction of IronX breaking down and removing unwanted ferrous contamination.
Airborne chemical compounds and ferrous (iron-containing) particles penetrate auto paint and create corrosive compounds that eat into the paint's sublayers. Detailing clay removes the particles but it doesn't remove their effects - corrosion may already be creeping under the paint's surface.
The only way to truly remove these damaging particles is with a dedicated iron remover like IronX. IronX opens up the paint's pores to flush out iron particles and to neutralize the caustic compounds that have developed as a result of the particle. In one step, you can eliminate the cause and its effects.
IronX is completely safe and and effective on both automotive paint and safely cleans clear coats. IronX is also highly recommended for all clear coated alloy wheels. Brake dust and road grime become baked onto wheels over time. Brake dust contains high levels of iron and can quickly pit clear coated wheels. When you use a product like IronX, you're able to stop the corrosion in its tracks.
Manufacture's Note: IronX should not be used on bare metal parts, brake calipers, wheel balancing weights, or SMART paint repairs. Mask off these areas. Avoid letting Iron X dry on any surface.
IronX is easy to use and you can see it working! IronX is a clear solution in the bottle but it turns purple when it comes into contact with sintered iron particles. IronX turns the iron into a water soluble complex for easy removal. After five minutes of dwell time, wipe down the surface and rinse thoroughly. After using IronX, you can polish and clay your vehicle as you normally would. After your car is prepped properly, it has a perfect surface to be coated with CQuartz Paint Coating.
Proper vehicle care with IronX means taking care of your investment above and below the paint's surface. IronX Iron Remover removes iron particles and their effects to keep the paint clean and healthy.Directions:
- Wash the car or wheels surfaces, make sure surface is in cool temp.
- Shake well, spray on the surface. Rub it in with damp sponge thoroughly.
- Wait 5 min. while contaminants change its color to purple/red. Wipe off with damp soft sponge. Don't let the IronX dry completely on surface!
- Rinse well or power wash the whole surface. The vehicle is ready to clay now.
ORMD Warning - Federal regulations prohibit this product by shipping via air. This item is shipped by GROUND service only.