CARPRO Lift Pre-Wash Snow Foam

Give your paint a lift!

CARPRO Lift is an advanced pre-wash solution designed to do all your heavy lifting. Most standard car washes are designed to be gentle cleaners to help protect you wax or sealant. Unfortunately, sometimes that just doesn't cut it. Baked-on road grime, dirt, and bug splatter required a stronger solution to break their bond safely. And that is CARPRO Lift. Just as the name implies, CARPRO Lift contains a mix of high pH cleaning agents designed to dissolve and lift away heavy deposits of contamination. When paired with a foaming tool, CARPRO Lift creates a thick lather that clings to the surface, easily softening hardened deposits of contamination that can then be rinsed away. The powerful cleaning agents in CARPRO Lift will also serve as a stripping agent to remove old waxes and sealants and prepare your paint for a fresh coat. CARPRO Lift is designed as a pre-wash and CARPRO recommends following using CARPRO Reset to get the surface ready for polishing or protection, or using CARPRO Lift with a traditional washing method.

HIGH CONCENTRATED! Each bottle packs plenty of pre-wash power!
CARPRO Lift is typically used 1:10 but can be diluted further depending on personal preference. If used by the typical dilution ratio, you'll end up with over a gallon of wash solution! This will give more than enough product to rid your paint of any bugs or road grime that tries to stick around!

FOAMING! Creates a thick foam that clings to the surface for maximum dwell time!
CARPRO Lift is a cleaner that clings to the surface. The high-foaming formulation creates a dense foam that produces incredible dwell time. This gives the product more time to breakdown stubborn grime and those burdensome bugs that are hindering the appearance of your paint.

STRIPS! High pH level packs the punch of an APC to remove bugs guts, road grime, and more!
This is a foaming wash that doesn't play around when it comes to cleaning. CARPRO Lift contains 12pH cleaning agents to break the bond seemingly immovable contamination. While this isn't ideal in a maintenance wash, it can also be beneficial to those seeking a fresh shine. The heavy-duty cleaners in CARPRO Lift will remove old waxes and sealants allowing for you to apply a fresh coat on a freshly cleaned surface!

PRE-WASH:

• Use only on cool surfaces and out of direct sunlight. Do not allow to dry on surface.
• Dilute CARPRO Lift with water 1:10 (Lift can be mixed with a leaner ratio for more of a flowing mixture or with a stronger ratio for denser foam)
• Dilute CARPRO Lift with water 1:10 (Lift can be mixed with a leaner ratio for more of a flowing mixture or with a stronger ratio for denser foam)
• Rinse thoroughly with a strong jet of water
• Complete the washing process using CARPRO Reset

SINGLE WASH:

• Use only on cool surfaces and out of direct sunlight. Do not allow to dry on surface.
• Pre-rinse the vehicle with free-flowing water to remove loose debris.
• Dilute CARPRO Lift with water 1:10 (Lift can be mixed with a leaner ratio for more of a flowing mixture or with a stronger ratio for denser foam)
• Allow the product to dwell on the surface for about a minute or longer, being sure not to allow the product to dry.
• It is critical to rinse your mitt or sponge periodically in a second bucket filled with clear water or with a hose.
• Rinse thoroughly with a strong jet of water to remove wash residue.
• Dry with your preferred microfiber towel or blower

500 ml.