The perfect jaw-dropping shine starts with clean, smooth paint. BLACKFIRE PolyClay II is an advanced synthetic detailing clay bar that deep cleans the paint and creates a perfectly smooth surface ready for polishing, glazing, sealing, or waxing. BLACKFIRE PolyClay II works on all paint finishes, including clear coats. It is easy to work with and leaves almost no residue on the surface of the vehicle. PolyClay II does not dry out with age and does not decompose with repeated applications. BLACKFIRE PolyClay II leaves auto paint feeling slick, clean, and silky.
BLACKFIRE PolyClay II removes what day to day driving puts into your vehicle’s paint. If you drive your car, it is going to collect paint contamination. There is no wax or paint sealant that can fully protect against contamination from rail dust, brake dust and environmental fallout. Most paint contamination consists of tiny metallic particles from brake pad linings and rail dust created from the friction of train wheels against railroad tracks. These hot, metallic particles fill the air on highways and near railroad tracks where they ultimately land on your car's finish, burning through any wax or sealant coating and embedding themselves in the top paint or clear coat layer. Contaminants can be felt as a "rough or gritty" texture on the paint's finish.
BLACKFIRE PolyClay II is the latest in clay technology. It is the most recent innovation of the original detailing clay bars developed in Japan in the 1990s. It works by pulling contamination off the surface. It is not abrasive and does not remove the top paint layer. PolyClay II does not dry out with age and does not decompose with repeated applications. BLACKFIRE PolyClay II leaves auto paint feeling slick, clean, and silky.
Only detailing clay can make your vehicle feel silky smooth without polishing. Use BLACKFIRE PolyClay II twice a year to enjoy the slickness and shine that comes from being truly clean.
One 4 oz. bar of PolyClay II will clean up to 10 cars.
For best results using BLACKFIRE PolyClay II, mist a small area (2 sq. ft.) of the vehicle with BLACKFIRE Clay Lubricant and rub the clay bar over the surface. The clay will "grab" at first. Continue lightly rubbing the clay over the surface until it moves freely. When the bar moves freely, the surface is clean. Wipe off any residues with a microfiber towel and proceed to the next area.
If clay residues resist easy wipe-off, re-mist the cleaned area with Clay Lubricant and wipe with a clean microfiber towel. Even stubborn residues will wipe off easily.