|Xtreme Machine Technology
applied by hand!
Don’t have a polisher? No problem! The products in
Pinnacle XMT Series are so advanced and so user-friendly,
they will yield impressive results when applied by hand.
The combination of Concentrated Micro-Abrasives and
emollients allows XMT swirl removers to work effectively
without creating the kind of hazing that often results
from compounds. The abrasives found in XMT swirl removers
are precisely milled to break down to a fine polish, even
if your method of application doesn’t produce much heat.
If you prefer the hands-on approach to car care, we invite
you to try XMT Series. The Pinnacle XMT Light Swirl
Remover Intro Kit is designed to give you everything
you need to improve your vehicle’s paint by hand. The
products in this kit will remove light swirls, scratches,
and mild oxidation. An included applicator makes it easy
to achieve the results you want without a polisher.
The Pinnacle XMT Light Swirl Remover Intro Kit
Pinnacle XMT Ultra Fine Swirl
This polish is made with such small abrasives that you
can’t see them with the naked eye. The sheer number and
minute size of the abrasive particles blend away fine
flaws in the clear coat without leaving any trace of
surface marring or haze. Just like a fine jeweler’s rouge,
XMT’s Concentrated Micro Abrasives leave the paint finish
glossy and smooth, just like new. XMT Ultra Fine Swirl
Remover is for like-new paint that is just starting to
show signs of age. It can also be used as a finishing
Pinnacle XMT Fine Swirl remover #2
Pinnacle XMT Fine Swirl Remover is a blend of mild
abrasives and lubricating oils that remove light to
moderate imperfections on aging paint finishes. If your
vehicle is not new but has no severe paint damage, this is
the swirl remover for you. It removes light to moderate
imperfections like swirls, mild scratches, and light
oxidation without reducing surface gloss. You will not
need a finishing polish.
Pinnacle XMT Carnauba Finishing
The gentle cleaners blend away minor flaws - like spider
webbing, micro-marring, and overall dullness – to increase
depth and clarity. At the same time, a layer of carnauba
bonds to the paint surface to further enhance the dynamic
shine created by the glaze. What can’t be removed with the
cleaners is filled in with carnauba to create a smooth,
flawless finish. It’s perfection and protection in one!
Use XMT Carnauba Finishing Glaze as the finale to
your detailing process. To increase depth and brilliance,
top the glaze with Pinnacle Signature Series II or
Polish ‘N Wax Applicator
This two-sided applicator is an excellent tool for cutting
in close around trim and mirrors, places that your
polisher can’t go. The foam applicator has gray finishing
foam on one side and orange light cutting foam on the
other. You get two applicators in one!
2 Cobra Deluxe Orange Microfiber
Applicators, 3.5 x 4.5 inches
These Cobra Deluxe Orange Microfiber Applicators are great
for applying rubber and vinyl dressings, polishes, and
cleaners to your vehicle’s most delicate surfaces. With
over 200,000 strands of microfiber per square inch, these
applicators will glide over paint, plastic, even glass –
2 Cobra Cobra Microfiber Detailing
Cloths, 16 x 16 inches
These versatile towels are great for any variety of
detailing tasks, from general washing and scrubbing off
road contaminants, to applying and buffing off wax and
all-in-one protectants. All the Cobra Detailing Cloths
boast an 80/20 polyester/polyamide blend in a special
“feather” weave that increases their absorption
properties, guaranteeing high performance and durability.
Detail your way with the Pinnacle XMT Light Swirl
Remover Intro Kit. It contains all the products you
need to restore your vehicle’s finish by hand.
Use the products as follows:
- Apply a quarter-size amount of Pinnacle XMT Fine
Swirl Remover #2 or XMT Ultra Fine Swirl Remover
#1 to the orange side of the Polish ‘N Wax
Applicator. Work the swirl remover into the paint
one small section at a time. Use an overlapping, figure
eight motion to ensure good coverage.
- Once the swirl remover dries to a haze, buff away
the residue with the Cobra Microfiber Towel.
Repeat these steps until you’ve polished the entire
- Apply a quarter size amount of XMT Carnauba
Finishing Glaze to the gray side of the Polish ‘N
Wax Applicator. Spread the glaze in a thin, even
coat over one section at a time.
- After the glaze dries, buff off the haze with the
second Cobra Microfiber Towel.
- For longer lasting protection, follow up with your
favorite Pinnacle Wax.
12 oz. XMT Fine Swirl Remover #2
12 oz. XMT Ultra Fine Swirl Remover #1
12 oz. XMT Carnauba Finishing Glaze
Polish ‘N Wax Applicator
2 Cobra Deluxe Orange Microfiber Applicators, 3.5 x 4.5
2 Cobra Cobra Microfiber Detailing Cloths, 16" x 16"
A total retail value of $77.92, you