Eliminate severe scratches and
oxidation with XMT #4!
If your vehicle suffers from severe oxidation, swirls,
and scratches, the Pinnacle XMT Heavy Duty Swirl Remover
Complete Kit is the answer! Eliminate cloudy oxidation,
severe swirls and most scratches to restore a like-new
luster to your vehicle’s paint.
XMT Heavy Duty Swirl Remover #4 is a polishing compound
intended for severe defect removal on single stage and
clear coat paint. Warning: this is an intense swirl
remover! XMT #4 is not for use on new or like-new
paint finishes. Use it on an oxidized, rough finish; XMT
#4 has amazing corrective properties and will restore the
paint to a like-new shine.
The XMT Heavy Duty Swirl Remover Complete Kit includes:
12 oz. XMT Heavy Duty Swirl Remover
#4
XMT Heavy Duty Swirl Remover #4 is a true compound. It
eliminates oxidation, severe swirls and scratches with a
blend of abrasives, cleaners, and lubricating oils. The
cleaners help remove dead, oxidized paint while the
abrasives level scratches and severe swirls. The oils help
lubricate the abrasive particles to minimize hazing,
though some hazing is expected and easily removed with the
next step, XMT Ultra Fine Swirl Remover #1.
Because of the strength of XMT Heavy Duty Swirl Remover
#4, we recommend that you apply it with a white polishing
pad. Only in extreme cases should a orange light cutting
pad be used.
12 oz. XMT Ultra Fine Swirl Remover
#1
This polish is made with such small abrasives that you
can’t see them with the naked eye. The sheer number and
minute size of the abrasive particles blend away fine
flaws in the clear coat without leaving any trace of
surface marring or haze. Just like a fine jeweler’s rouge,
XMT’s Concentrated Micro Abrasives leave the paint finish
glossy and smooth, just like new. XMT Ultra Fine Swirl
Remover is for like-new paint that is just starting to
show signs of age. It can also be used as a finishing
polish after XMT Heavy Duty Swirl Remover #4.
12 oz. Carnauba Finishing Glaze
The gentle cleaners blend away minor flaws - like spider
webbing, haziness, and overall dullness – to increase
depth and clarity. At the same time, a layer of carnauba
bonds to the paint surface to further enhance the dynamic
shine created by the glaze. What can’t be removed with the
cleaners is filled in with carnauba to create a smooth,
flawless finish. It’s perfection and protection in one!
Use XMT Carnauba Finishing Glaze as the finale to your
detailing process. To increase depth and brilliance, top
the glaze with Pinnacle Signature Series II (not
included).
6.5 inch CCS Orange Light Cutting
Pad
Firm, high density foam for scratch and defect removal.
Use this pad with polishes and swirl removers. It’s an all
around pad that will work on most light to moderate
imperfections. The CCS orange pad is an ideal choice for
applying XMT Intermediate Swirl Remover.
6.5 inch CCS White Polishing Pad
Less dense foam formula for the application of waxes,
micro-fine polishes and sealants. This pad has very light
cutting power so its perfect for pre-wax cleaners. Apply
XMT Ultra Fine Swirl Remover with the white polishing pad.
6.5 inch CCS Gray Finishing Pad
Apply XMT Carnauba Finishing Glaze with a gray foam pad.
Composition is firm enough to withstand added pressure
during final finishing to remove buffer swirls. It has no
cut and will apply thin, even coats of waxes, sealants,
and glazes.
2 Cobra Microfiber Towels, 16 x 16
inches
Constructed of the finest quality microfibers the Cobra
Detailing Towel sets the standard with an outstanding
80/20 blend of polyester/polyamide filament, woven so
densely they boast over 200,000 strands of fiber per
square inch of fabric! These strands are nearly invisible
to the naked eye, and are 100 times smaller than a human
hair! Use this cloth for cleaning, buffing, and wiping
away wax.
12 oz. Pinnacle XMT Polishing Foam
Pad Conditioner
Prevention of dry buffing is as easy as misting an unused
pad with Pinnacle XMT Polishing Pad Conditioner. It only
takes a couple of spritzes to prep the pad for polishing.
The rich lubricants instantly penetrate the pad, softening
and conditioning the material. Even if the pad has never
been used, it will glide across the paint like you’re
halfway through the detail session.
Polish ‘N Wax Applicator
This two-sided applicator is an excellent tool for cutting
in close around trim and mirrors, places that your
polisher can’t go. The foam applicator has gray finishing
foam on one side and orange light cutting foam on the
other. This is two applicators in one!
All pads included in the XMT Heavy Duty Swirl Remover
Complete Kit have hook & loop backing, which attaches
securely to a 5 or 6 inch hook & loop backing plate. The
6.5 inch pads in this kit are intended for a dual action
polisher, such as the Porter Cable 7424.
Use the products as follows:
- Prep pads before polishing with Pinnacle XMT
Polishing Pad Conditioner. On significant swirls and
flaws, apply XMT Heavy Duty Swirl Remover #4 with the
orange light cutting pad. (If you are unsure of the
severity of the flaws, start with a white polishing pad.
Step up to the orange pad if necessary.) Use XMT #4 only
on problem areas to avoid unnecessary compounding of
healthy paint. Buff off residue after each section.
- Apply XMT Ultra Fine Swirl Remover #1 with the white
polishing pad or the Polish ‘N Wax Applicator. You can
do an all-over polish to remove the lightest
imperfections with this gentle swirl remover. Buff off
residue after each section.
- Your paint should be in great shape at this point.
Apply XMT Carnauba Finishing Glaze with the gray foam
pad. Buff off the residue as you complete each section.
- Your vehicle will be glossy and reflective after
applying the glaze. For the deepest shine and
longer-lasting protection, apply your favorite wax. We
recommend Pinnacle Signature Series II Carnauba Paste
Wax for a fantastic reflection on any color.
- Clean each pad after use with Pinnacle XMT Polishing
Pad Cleaner. Spray each pad generously with the cleaner
and toss them in a bucket of clean water. Agitate with a
Foam Conditioning Brush if necessary. Rinse well and let
air dry.
The Pinnacle XMT Heavy Duty Swirl Remover Complete Kit
is an exceptional value, particularly compared to the
price of repainting. With the power of XMT Heavy Duty
Swirl Remover, this kit can cure your vehicle’s worst
paint problems to restore the showroom gloss.
Kit includes:
12 oz. XMT Heavy Duty Swirl Remover #4
12 oz. XMT Ultra Fine Swirl Remover #1
12 oz. Carnauba Finishing Glaze
6.5 inch CCS Orange Light Cutting Pad
6.5 inch CCS White Polishing Pad
6.5 inch CCS Gray Finishing Pad
2- 16 x 16 inch Cobra Microfiber Towels
12 oz. XMT Polishing Pad Conditioner
Polish ‘N Wax Applicator
A total retail value of $116.40, you
SAVE $26.41!
|
Pinnacle XMT Heavy Duty Swirl Remover Complete Kit FREE BONUS
