Concentrated Micro Abrasives are the secret to this
swirl remover’s success.
Pinnacle has good news for anyone who wants to correct paint defects at home:
You can. Pinnacle XMT Fine Swirl Remover corrects a wide array of paint
imperfections without consulting a professional. All you need is a dual action
polisher to bring your paint back to showroom perfection.
This mild product is designed to address the most common paint flaws without
compromising the clear coat. That includes overspray, light to moderate swirls
and scratches, mild oxidation, and water spots. Erase months or years of damage
in one afternoon with Pinnacle XMT Fine Swirl Remover.
Pinnacle XMT Fine Swirl Remover is a blend of mild abrasives and
lubricating oils that remove light to moderate imperfections on aging paint
finishes. If your vehicle is not new but has no severe paint damage, this is the
swirl remover for you. This product presses rewind on your current paint finish,
taking it back to its showroom-new shine.
XMT Fine Swirl Remover contains Concentrated Micro-Abrasives, which are
smaller than the industry average for a swirl removing compound. The smaller
abrasives break down under less heat. Therefore, they are ideal for use with a
dual action polisher.
The number and size of these proprietary abrasives enable them to effectively
erase surface defects without marring the paint. The abrasives diminish as you
polish so the swirl remover in effect becomes a finishing polish. Pinnacle
XMT Fine Swirl Remover leaves the paint silky smooth in one step!
All XMT Series products were formulated in sunny South Florida, the home of
Pinnacle Natural Brilliance. Intense heat and humidity are constant challenges
here. That’s why all XMT products were created to work as promised in the sun or
Pinnacle is dedicated to preserving your vehicle and the environment.
Pinnacle XMT Fine Swirl Remover is VOC compliant, body shop safe,
silicone-free, and clear coat safe.
Apply XMT Fine Swirl Remover with a white polishing pad on your dual
action polisher. Pour a quarter-size amount of polish onto the pad and set the
polisher at a maximum speed of 5000 OPM. Work the polish in until it starts to
dry or disappear. Turn the polisher off the buff the paint with a Cobra
microfiber towel. XMT Fine Swirl Remover has no fillers so you can see
the real results of your work immediately. Follow up with your favorite Pinnacle
wax or with Pinnacle XMT Carnauba Finishing Glaze.
Take the guess work out of detail work with Pinnacle XMT Series. Pinnacle XMT
Fine Swirl Remover works with the motion of your dual action polisher to
erase paint imperfections without marring.