Durable trim sealant and protectant for long-term protection
Prevents dirt adhesion and sun fade on exterior trim surfaces
UV protection helps prevent sun-fade and trim oxidation
Use on trim, grilles, moldings and cladding
Wolf's Chemicals “Trim Coat” Nano Dressing is a super-hydrophobic coating designed for use on textile surfaces. Powerful nano components form a water-repellent barrier that helps prevent liquid absorption in addition to keeping the surface cleaner by preventing dirt and other contamination from adhering. Wolf's Chemicals “Trim Coat” Nano Dressing coats your trim surfaces under a nearly impenetrable layer of protection to keep it looking like new for years to come.
Wolf's Chemicals “Trim Coat” Nano Dressing creates a dark, rich appearance that compliments the appearance of trim, grills, moldings, and body cladding. Unlike oil-based dressings, “Trim Coat” is chemical resistant and will not wash away. The excellent water repellency will give trim pieces a self-cleaning effect to prevent dirt build and grime.
Wolf's Chemicals “Trim Coat” Nano Dressing is super hydrophobic. Water cannot penetrate the surface. Instead it will pool into tight beads and quickly flow off of the surface. Wolf's Chemicals “Trim Coat” Nano Dressing will keep exterior trim pieces looking cleaner for longer.
Formulated with UV absorbers, Wolf's Chemicals “Trim Coat” Nano Dressing helps prevent the number one cause of trim aging. Ultraviolet radiation will cause trim to oxidize and bleaches color from the surface. This makes “Trim Coat” ideal for use on daily drivers which are exposed to frequent sunlight. Wolf's Chemicals “Trim Coat” Nano Dressing is easy-to-apply and does not create a greasy, sticky, or oily film which attracts more dirt.Application:
- Clean the surface thoroughly and allow it to dry completely. Wipe with isopropyl alcohol prior to application.
- Apply a small amount of “Trim Coat” onto a microfiber or foam applicator and spread into a light even coat.
- Apply a second coat if necessary or for added protection and gloss.
- Remove excess “Trim Coat” with a soft, clean microfiber towel.
- Allow a minimum of 12 hours for the product to fully cure before use.
Note: Apply in temperatures above 15 degrees C (59 degrees F).
Made in Budapest, Hungary