Durable leather sealant forms a long-lasting coating on leather surfaces
Prevents dirt adhesion and liquid absorption on all leather surfaces
UV protection helps prevent sun-fade and leather cracking
Easy-to-use and safe for all leather surfaces.
Wolf's Chemicals “Hiderophobe” Nano Leather Sealant is a super-hydrophobic coating designed for use on leather surfaces. Powerful nano components impregnate leather materials, forming a water-repellent barrier that helps prevent liquid absorption in addition to preventing dirt and other contamination from adhering. Wolf's Chemicals “Hiderophobe” Nano Leather Sealant coats your leather under a nearly impenetrable layer of protection to keep it looking like new for years to come.
Wolf's Chemicals “Hiderophobe” Nano Leather Sealant excels were traditional conditioners and protectants fail. Wolf's Chemicals “Hiderophobe” Nano Leather Sealant provides long-lasting protection against abrasion, acidic body oils, sun fade, dirt, and liquid stains.
Every time you slide into your seats or grip your steering wheel you abrade the factory coating that protects your leather and gives it color. When the leather is dirty, this abrasive effect is amplified as the dirt acts like a fine-grade sandpaper. “Hiderophobe” prevents leather damaging abrasion in two ways. First, the powerful barrier prevents dirt from accumulating into the surface. Second, it provides a sacrificial barrier that blankets the leather to prevent the hide from wearing.
Wolf's Chemicals “Hiderophobe” Nano Leather Sealant is super hydrophobic. Water cannot penetrate the surface. Instead it will pool into tight beads and quickly flow off of the surface. Wolf's Chemicals “Hiderophobe” Nano Leather Sealant prevents water, soda, coffee or other liquids from absorbing into, and staining, your vehicle's leather. Even human body oil, which can cause long-term damage to leather, cannot penetrate “Hiderophobe's” powerful protective blanket.
Formulated with UV absorbers, Wolf's Chemicals “Hiderophobe” Nano Leather Sealant helps prevent ultraviolet radiation from drying out the leather or bleaching out the color. Wolf's Chemicals “Hiderophobe” Nano Leather Sealant is easy-to-apply and does not create a greasy, sticky, or oily film. It helps leather remain soft and supple to the touch by preventing the leather from drying out.Application:
- Clean the leather surface thoroughly and allow it to dry completely.
- Apply a small amount of “Hiderophobe” onto a foam applicator and apply a light, even coat to the leather.
- Once the surface has been thoroughly treated, allow “Hiderophobe 15 to 20 minutes to cure.
- Apply a second coat for the best results.
- Allow a minimum of 12 hours for the product to fully cure before use.
Note: Apply in temperatures above 15 degrees C (59 degrees F).
Made in Budapest, Hungary