German Wheel Restoration Kit
Everything needed to refinish bare metal wheels!
Four-part system for complete refinishing.
Authentic German products create an authentic European finish.
Easy-to-use products for great results.
The German Wheel Restoration Kit is designed to refinish bare metal wheels and replicate an authentic European silver wheel finish. This four-part kit includes a cleaner, primer, silver base coat, and high gloss final coat. For best results remove the wheels from the vehicle and strip off the existing finish.
The German Wheel Restoration Kit includes products made in Germany by Wurth and 1Z Einszett. Both companies are European leaders in car care and their refinishing products are considered best in class.
Wurth Clean Solve, 17 oz.
Wurth Clean-Solve is a fast acting cleaner and solvent that will quickly remove wax, tar, gum, grease, paint over-spray, adhesive, oil, and silicone. Clean-Solve can be used on a variety of surfaces including: base coat, clear coat, aluminum, fiberglass, wood, glass, fabrics, vinyls, and even carpeting. Clean-Solve does not leave any film. Use Wurth Clean Solve with the the Wolfgang Finger Pockets and All Purpose Microfiber towel to remove any residues that could interfere with priming prior to using Wurth Self Etch Primer.
Wurth Self Etch Primer, 12 oz.
Use Wurth Self Etch Primer to prepare painted wheels for refinishing. This fast drying formula has excellent sanding properties, filling properties, and strong adhesion to all metals and other surfaces. Remove the wheel finish first, than apply Wurth Self Etch Primer in several light coats. Allow several hours to dry before painting with color.
1Z Einszett Silber “Silver Wheel Lacquer” Spray 13.5 oz.
1Z Einszett German Alloy Silver Wheel Lacquer is a fast-drying lacquer that matches the standard alloy wheel paint use by Porsche, BMW, Mercedes, VW, Audi and most other European OEMs. Einszett German Alloy Silver Wheel Lacquer can be effectively used for spot repairs or full wheel restoration. The German design nozzle produces a fine, even spray that is easy to control and produces a near-factory finish. Einszett German Alloy Silver Wheel Lacquer dries quickly and is chip resistant. Use several very light coats and allow 30 minutes drying time between coats. The silver color coat will have a textured look and feel that provides a three dimensional effect when properly
Wurth High Gloss Clear Lacquer, 13.5 oz.
Wurth High Gloss Clear Lacquer is the final high-gloss coat to achieve the perfect European wheel finish. For best results spray 2 to 3 light coats about 30 minutes apart, in temperatures between 70 and 90 degrees Fahrenheit. After the final coat give several long hours to dry then enjoy your work in the sun.
2 Wolfgang Finger Pockets
Clean and polish tight spaces with the European green foam Wolfgang Finger Pockets. These pockets fit over 2 to 4 fingers snugly you can maneuver them into hard-to-reach areas. Use these finger pockets to clean the wheel thoroughly before painting or to maintain the wheel after refinishing.
16 x 16 All Purpose Microfiber Towel
Use these microfiber detailing towels for drying, buffing, or as a finishing wipe down. Microfiber is designed to be light, strong, super-absorbent and quick drying. The fibers are non-abrasive, and are woven so tightly that it’s absolutely lint free and extremely durable. Unbelievably, these ultra-tough fibers are engineered to absorb seven times their weight in moisture.
Directions and Tips
Start by removing the wheels to be painted and remove the existing finish completely. Clean the surface with Wurth Prep-Solve to remove any lingering smudges or grease that could interfere with priming.
Prime the wheel with several light coats of Wurth Self Etch Primer and allow to dry for several hours.
Apply 2 to 3 coats of 1Z Einszett Silber “Silver Wheel Lacquer” Spray 30 minutes apart until even coverage is achieved. It is always better to apply thin coats and build the color coat from there instead of doing one thick coat that could run or sag. Allow to dry completely before next step.
Complete your total German wheel restoration with 2 to 3 light coats of Wurth High Gloss Clear Lacquer. Allow to dry completely before driving.
German Wheel Restoration Kit Contents:
17 oz. Wurth Clean-Solve
12 oz. Wurth Self Etch Primer
13.5 oz. 1Z Einszett Silver Wheel Spray Paint
13.5 oz. Wurth High Gloss Clear Lacquer
16 x 16 inch Microfiber Towel
2 Wolfgang Finger Pockets
Total retail value of $85.93. You save $35.94!
Note: Federal regulations prohibit the shipment of aerosol products by air. This item is shipped by ground only.
Overall Rating for German Wheel Restoration Kit