driveawayProducts Featured Brands
  • Ultima Automotive Finish Care & Car Detailing Products
  • SONUS
  • ULTIMATE DETAILING MACHINE
  • Klasse Car Care Products
  • P21S
  • RAGGTOPP
  • 303 PRODUCTS
  • BLUE PERL
  • Carrand Car Care and Car Detailing Products
  • Motorcycle Care
Porter Cable 7424 Swirl Remover Foam Polish Pad | SwirlBuster

Revolutionary new foam polishing pad for the Porter Cable 7424 Car Polisher:

  • Removes swirl marks and oxidation like magic!

  • Virtually eliminates polish splatter!

  • Holds more car polish to reduce stop and go.



This is a discontinued item, but we think you will love the DAS SwirlBuster Pad!




Finally, a polishing pad that easily removes swirl marks, water spots and fine scratches using the Porter Cable 7424 dual-action car polisher!

The Sonus SwirlBuster™ Foam Polishing Pad is a revolutionary new polishing pad that works with the Sonüs SwirlBuster™ Clearcoat Polish to safely and effectively remove swirl marks and other minor paint defects.

The SwirlBuster™ Foam Polishing Pad is constructed from the same Swisstex foam used by Mercedes-Benz and other European car makers to remove paint defects on the assembly line.

Sonus improved on the standard Swisstex OEM pad in two significant ways:

  1. The SwirlBuster™ is 30% thicker! This is important for use with a dual-action polisher, as pressure is required to work the polish. A thin pad will “bottom out”, causing hot spots.
  2. Innovative “Polishing Pocket” grooves. The Polishing Pocket cut in the face of the pad allows the pad to be loaded with polish and prevents splatter. As you apply pressure to the pad, polish in the Polishing Pocket is applied to the surface.


The foam, pad dimensions and Polishing Pocket all come together to annihilate swirl marks!

SAVE $8 when you purchase the SwirlBuster Polish and a SwirlBuster Foam Polishing Pad together.

INSTRUCTIONS
Use the Sonus SwirlBuster™ Foam Polishing Pad in conjunction with a 5” to 6” Velcro backing plate. A 5” backing plate will be less aggressive than a 6” plate.

Prime the pad before first use with 2-3 sprays of pad conditioner or detailing spray.

Load the Polishing Pocket with a generous amount of Sonus SwirlBuster™ Polish (or your favorite “swirl remover polish”), but do not overfill.

Place pad flat on paint surface to be polished, apply enough pressure to put the pad under load (slightly compressed) and switch the polisher on.

If using the Porter Cable 7424 dual-action polisher, run the machine at 5 to 6 on the speed dial. If using on a rotary machine, run between 750 and 1000 RPM.

Polish a 2 to 3 square foot area at a time. Run the polisher until the polish runs clear and then reduce pressure and speed. Wipe off polish residue to check work. Repeat if necessary.

Wash the pad with dish detergent and water. Gently wring out excess water and allow to air dry.