I would recommend this item to a friend.
Exceptional cutting power
March 17, 2016
These are my go to pads for heavy correction. Their cutting power is a step above the Rupes Coarse Foam pad. The only down side is because of the increased in cutting power they tend to build up more residue than a traditional foam pad and require a blow out with compressed air after every panel. If you don't blow it out, the cutting power will be severely reduced and you will start to dust like crazy. Also what i've noticed about these pads is the microfiber doesn't get matted down after being worked. I believe this is attributed to the air channels in the pad itself. In comparison, the Meguiar's microfiber discs get matted down extremely quick and require you to either brush or blow the pad often to stand them back up so you can get your cutting power back. These pads tend to run much cooler than other microfiber cutting pads. I can use these on plastic or fiberglass panels and not have to worry about it running too hot.
Pros:-Exceptional cutting power when used with Zephir Gloss -Long working times on panel -Low heat
Cons:-Can be difficult to clean.