Chemical Guys Pure Leather Conditioner
Conditions leather surfaces.
Dries to the touch.
Natural leather fragrance.
Breathe New Life Into You Leather! The smell and feel of soft conditioned new leather in a bottle.
Chemical Guys Leather Conditioner leaves a silky smooth dry to the touch feel while restoring the Fresh Natural Leather Smell. CG Leather Conditioner is a lavish lotion that penetrates deep into leather to condition and nourishes leather of all ages. CG Leather Conditioner preserves and protects leather from drying, cracking and brittleness that occurs naturally with age while restoring the fresh smell of leather.
It is important to always clean leather lightly before conditioning it, after all you don’t put on lotion on your skin after a long jog in the park. For cleaning dirty leather Chemical Guys Recommends Leather Cleaner- a pH balance leather cleaner that gently lifts dirt and grime away from leather. Cleaning lightly with Leather Cleaner removes dirt and dust that get stuck in the pores of leather. Removing dust and dirt is key to protecting the leather because a constant build up of dirt and dust combined with you driving and getting in and out of the vehicle increase friction to the leather causing wear and tear that is often irreversible. Proper leather cleaning and conditioning keeps the leather smooth and protected.
Chemical Guys Leather Conditioner offers UV (30) protection. Ultra-violet rays quickly cause deterioration of leather and shorten its lifespan .Chemical Guys Leather Conditioner is 100% dry to the touch and absorbs into the leather leaving it naturally shiny yet dry to the touch.
- Preserves leather by returning lost moisturizers that keep leather soft and supple.
- Works like a protective shield repelling dirt and stains.
- engineered to restore pleasant natural leather scent to leather.
Find a nice cool, shaded area in which to condition your leather. Always start by cleaning the leather first with a light pH balanced cleaner like Chemical Guys Leather Cleaner Be sure leather is clean, free of all contaminants, and dry. For the best possible results, prepare leather for conditioning by first using Chemical Guys Leather Cleaner.
1. Cleaner leather first with damp towel or if dirty, its best to use A Leather Cleaner.
2. Shake well.
3. Apply CG Leather Care Conditioner to a clean, cloth or a microfiber applicator.
4. Gently wipe down leather using a circular motion to massage into the pores.
5. Allow the conditioner a few minutes to penetrate, then buff off excess with a clean towel. After allowing leather to dry, a quick buff with a soft cotton or microfiber towel will yield a glowing, satin finish.
16 oz.This product cannot ship internationally.