Detailer’s Pro Series + Grit Guard® = swirl-free paint!
Every time you dip you mitt into the wash water, some grit falls off into the water. When you dip the mitt again, the loose grit in the bucket will grab onto the mitt again and end up back on your vehicle. As you wash, you’re rubbing the grit across the paint, causing swirls. Keep your wash water clean with the Detailer’s Pro Series Complete Wash System with Dolly.
The Grit Guard has a radial grid surface that scrapes dirt out of your mitt or sponge. Four quadrants at the base of the Grit Guard calm the wash water and hold the grid above the bottom of the bucket. Dirt falls to the bottom and stays there. The raised radial surface fits in the bottom of any 5 gallon bucket and extracts grit from your wash mitt or sponge when you drag it across the Grit Guard.
The Detailer’s Pro Series Complete Wash System with Dolly includes a dolly for your convenience. Roll the bucket of wash water around the vehicle as you work. With the lid and seat cushion in place, the bucket becomes a creeper where you can sit as you detail the lower panels of your vehicle.
When not in use, store your wash mitts and brushes inside the bucket. Seal it with the included lid to keep wash tools clean. Closed storage will prevent dust and dirt from settling on wash tools, and then being transferred to your vehicle.
Wash System includes:
Detailer’s Pro Series 5 Gallon Bucket
Gamma Seal® Lid