The future of vehicle protection is here, today!
Easy to applysurface coating offers powerful protection
Nano grade Silicium molecules electrostatically bond to the surface
Provides excellent UV protection and intense water repellency
Permanon Platinum Finish Protection uses precisely engineered science to give your paint superior protection that is easy to apply. It is brilliant, 21st century protection you can use in your own garage. Permanon Platinum Finish Protection is not a carnauba based wax or a synthetic polymer sealant that will degrade with time. It is a durable Silicium shell that produces a brilliant protected shine. Permanon Platinum Finish Protection coats your paint at the nano grade level , sealing it from things as miniscule as bacteria so even dirt cannot stick.
Permanon Platinum Finish Protection protects your paint and hard surfaces far better than a normal wax or paint sealant can. Waxes and paint sealants sit onto of the surface topically. Permanon Platinum Finish Protection uses an electrostatic charge to draw itself into the surface for the ultimate in protection. The key ingredient in Permanon Platinum Finish Protection is nano engineered Silicium (Si14). This is the same ingredient used to make glass. With careful science, Permanon Platinum coats your paint in nano sized platelets of Silicium that offers superior protection with a high-gloss glass-like shine.
This incredible product is the conglomeration of modern science and German engineering. The Silicium ingredients in Permanon Platinum Finish Protection are nano grade. A nanometer is 1/1,000,000,000th of a meter in size. This gives Platinum the ability to cover the entire surface, including microscopic pores, for total protection. Each Silicium molecule is positively charged. All surfaces have a negative charge. When diluted with water and misted onto the surface, Permanon Platinum Finish Protection will be pulled to the surface through an electrical charge to offer complete coverage and powerful bonding.
Because Permanon Platinum Finish Protection bonds on the nano level, it preserves the original surface material. Permanon Platinum Finish Protection works on almost all hard surfaces including paint, plastics, metals, painted or varnished wood, gel coat, glass, tile, stone, and more. It is an extremely effective, long lasting water repellent that is resistant to nearly all acids, alkaline solutions and solvents while offering significant protection against ultra violet light and sun fade. Once bonded to the surface, Permanon Platinum Finish Protection can only be removed with pH solutions greater than 12 or through abrasion (sanding or polishing).
Tip: Permanon Platinum Finish Protection is stable up to 572 degrees F. This makes ideal for protecting the appearance products found in engine bays. It is also ideal for wheels, suspension components, and brake calipers.Instructions:
General) Permanon is a surface coating. The paint or surface should be clean and free of any contamination or paint defects. After washing, inspect smooth painted surfaces by touch. If any texture or grit is present use detailing clay to restore a smooth feel. Any swirl marks, scratches, or paint imperfections that are visible in glossy paint should be polished away prior to application. The Silicium molecules in Permanon will bond to any car wax, sealant, or gloss enhancer. Wipe the surface clean using a paint prep or diluted isopropyl alcohol.
- Permanon must be applied to clean and bare surface. It must be free of any wax, silicone, oil, petroleum, polymer or other additives that leave residues. Remove these with a paint cleaning chemical such as Gtechniq Panel Wipe or diluted isopropyl alcohol.
- For road vehicles, Permanon recommends a 5% solution of Permanon. Platinum However, for boats/ships with a gel-coat they recommend the first application be applied undiluted as gel-coat is more porous than auto paint or polyurethane paints. This will give maximum protection as well as provide a good foundation for ongoing maintenance. Use a standard 32 oz spray bottle with an adjustable spray nozzle for a fine-mist application. Pour 50 ml of Permanon into the spray bottle, then fill with clean water to the 32 oz mark (if no mark, then simply add four generous cups of water) for a 5% solution.
- Lightly mist Permanon onto the surface. For vertical surfaces start from the top and work your way down. The Silicium molecules travel through the water and adhere immediately. Permanon bonds instantly so no additional buffing or polishing is required. Simply wipe away any remaining water with a soft cloth such as a Supreme 530 Microfiber Towel. You can apply Permanon to a wet or dry surface.