Permanon Diamond Finish Protection is the original concentrated protective formula! It will protect virtually all hard surfaces against acid rain, chemical damage, and UV sun fade. Permanon Diamond Finish Protection does not contain any carnauba wax or gloss enhancers. It is a durable Silicium shell that forms a protective barrier between your hard surfaces, including paint, wheels, and interior pieces, and the environment. Permanon Diamond Finish Protection coats the microscopic terrain of non-porous hard surfaces to offer superior protection that lasts.
Permanon Diamond Finish Protection protects your car's paint and hard surfaces far better than a normal wax or paint sealant can. Waxes and paint sealants sit onto of the surface topically. Permanon Diamond Finish Protection uses an electrostatic charge to draw itself into the surface for durable adhesion and the ultimate in protection. The key ingredient in Permanon Diamond Finish Protection is nano engineered Silicium (Si14). This is the same ingredient used to make glass. With carefully engineered science, Permanon forms a semi-permanent bond to all hard surfaces.
This incredible product is the conglomeration of modern science and German engineering. The Silicium ingredients in Permanon Diamond Finish Protection are nano grade. A nanometer is 1/1,000,000,000th of a meter in size. This gives Diamond the ability to cover the entire surface, including microscopic pores, for total protection. Each Silicium molecule is positively charged. All surfaces have a negative charge. When diluted with water and misted onto the surface, Permanon Diamond Finish Protection will be pulled to the surface through an electrical charge to offer complete coverage and powerful bonding.
Because Permanon Diamond Finish Protection bonds on the nano level, it preserves the original surface material. Permanon Diamond Finish Protection works on almost all hard surfaces but is formulated to protect automotive paints, including lacquers, enamels and modern basecoat/clearcoats. Permanon Diamond Finish Protection even forms a protective layer on interior trim such as plastic, metal, wool and rubber without altering the look. It is an extremely effective, long lasting water repellent that is resistant to nearly all acids, alkaline solutions and solvents while offering significant protection against ultra violet light and sun fade. Once bonded to the surface, Permanon Diamond Finish Protection can only be removed with pH solutions greater than 12 or through abrasion (sanding or polishing).
Tip: Permanon Diamond Finish Protection is stable up to 572 degrees F. This makes ideal for protecting the appearance products found in engine bays. It is also ideal for wheels, suspension components, and brake calipers.Instructions:
General) Permanon is a semi-permanent surface coating. The paint or surface should be clean and free of any contamination or paint defects. After washing, inspect smooth painted surfaces by touch. If any texture or grit is present use detailing clay to restore a smooth feel. Any swirl marks, scratches, or paint imperfections that are visible in glossy paint should be polished away prior to application. The Silicium molecules in Permanon will bond to any car wax, sealant, or gloss enhancer. Wipe the surface clean using a paint prep or diluted isopropyl alcohol.
- Permanon must be applied to clean and bare surface. It must be free of any wax, silicone, oil, petroleum, polymer or other additives that leave residues. Remove these with a paint cleaning chemical such as Gtechniq Panel Wipe or diluted isopropyl alcohol.
- Use a 5% dilution of Permanon Diamond Finish Protection for maximum effect and protection. Use a standard 32 oz spray bottle with an adjustable spray nozzle for a fine-mist application. Pour 50 ml of Permanon into the spray bottle, then fill with clean water to the 32 oz mark (if no mark, then simply add four generous cups of water) for a 5% solution.
- Lightly mist Permanon onto the surface. For vertical surfaces start from the top and work your way down. The Silicium molecules travel through the water and adhere immediately. Permanon bonds instantly so no additional buffing or polishing is required. Simply wipe away any remaining water with a soft cloth such as a Supreme 530 Microfiber Towel. You can apply Permanon to a wet or dry surface.
- For interior and other hard surfaces- Make sure the surface is clean and free of any wax, oil or silicone. Mist Permanon onto the surface and wipe dry with a soft microfiber towel.