Permanon Car Supershine Finish Protection is a tech-tech surface protection formula designed to keep frequently driven vehicles protected against whatever the road throws at it. It is 21st Century protection that will protect against acid rain, chemical damage, and UV sun fade. Permanon Car Supershine Finish Protection does not contain any carnauba wax or gloss enhancers. It is a durable Silicium shell that forms a protective barrier between your paint and the environment. Permanon Car Supershine Finish Protection coats the microscopic terrain of your vehicle’s paint for maximum gloss and water repellency.
Permanon Car Supershine Finish Protection protects your car's paint and hard surfaces far better than a normal wax or paint sealant can. Waxes and paint sealants sit onto of the surface topically. Permanon Car Supershine Finish Protection uses an electrostatic charge to draw itself into the surface for durable adhesion and the ultimate in protection. The key ingredient in Permanon Car Supershine Finish Protection is nano engineered Silicium (Si14). This is the same ingredient used to make glass. With careful science, Permanon Car Supershine coats your car or vehicle's paint in nano sized platelets of Silicium that offers superior protection with a high-gloss glass-like shine.
This incredible product is the conglomeration of modern science and German engineering. The Silicium ingredients in Permanon Car Supershine Finish Protection are nano grade. A nanometer is 1/1,000,000,000th of a meter in size. This gives Car Supershine the ability to cover the entire surface, including microscopic pores, for total protection. Each Silicium molecule is positively charged. All surfaces have a negative charge. When diluted with water and misted onto the surface, Permanon Car Supershine Finish Protection will be pulled to the surface through an electrical charge to offer complete coverage and powerful bonding.
Because Permanon Car Supershine Finish Protection bonds on the nano level, it preserves your vehicle's original surface material. Permanon Car Supershine Finish Protection works on almost all hard surfaces but is formulated to protect automotive paints, including lacquers, enamels and modern basecoat/clearcoats. It is an extremely effective, long lasting water repellent that is resistant to nearly all acids, alkaline solutions and solvents while offering significant protection against ultra violet light and sun fade. Once bonded to the surface, Permanon Car Supershine Finish Protection can only be removed with pH solutions greater than 12 or through abrasion (sanding or polishing).
Tip: Permanon Car Supershine Finish Protection is stable up to 572 degrees F. This makes ideal for protecting the appearance products found in engine bays. It is also ideal for wheels, suspension components, and brake calipers.Instructions:
General) Permanon is a durable surface coating. The paint or surface should be clean and free of any contamination or paint defects. After washing, inspect smooth painted surfaces by touch. If any texture or grit is present use detailing clay to restore a smooth feel. Any swirl marks, scratches, or paint imperfections that are visible in glossy paint should be polished away prior to application. The Silicium molecules in Permanon will bond to any car wax, sealant, or gloss enhancer. Wipe the surface clean using a paint prep or diluted isopropyl alcohol.
- Permanon must be applied to clean and bare surface. It must be free of any wax, silicone, oil, petroleum, polymer or other additives that leave residues. Remove these with a paint cleaning chemical such as Gtechniq Panel Wipe or diluted isopropyl alcohol.
- Use a 5% dilution of Permanon Car Supershine Finish Protection for maximum effect and protection. Use a standard 32 oz spray bottle with an adjustable spray nozzle for a fine-mist application. Pour 50 ml of Permanon into the spray bottle, then fill with clean water to the 32 oz mark (if no mark, then simply add four generous cups of water) for a 5% solution.
- Lightly mist Permanon onto the surface. For vertical surfaces start from the top and work your way down. The Silicium molecules travel through the water and adhere immediately. Permanon bonds instantly so no additional buffing or polishing is required. Simply wipe away any remaining water with a soft cloth such as a Supreme 530 Microfiber Towel. You can apply Permanon to a wet or dry surface.