BLACKFIRE Car Care Products Britemax Professional Detailing Products SONUS DETAILINGULTIMA PAINT CARE SYSTEM Zymol Car Care Products
Price Match Policy
click image to enlarge

Optimum Opti-Eraser – Fine Grade

Regular Retail:$19.99
Availability:Usually ships the same business day

Item Description:

The Optimum Opti-Eraser is a reinforced foam block coated in an advanced acrylic resin that mimics that paint cleaning action of traditional detailing clay with many additional benefits. Paint contaminants are tiny particles that attach to the paint's surface and cannot be removed by regular washing. Over time these particles block your paint from shining and reduce the durability of any wax or sealant you use. The Optimum Opti-Eraser allows you to quickly remove contamination from your paint, restoring the original shine and smooth feel.

The Optimum Opti-Eraser works by gliding over the surface on a film of Optimum ONR lubricant. Contamination such as rail dust, iron oxide, and environmental fallout will protrude above the lubricated film. The Optimum Opti-Eraser quickly removes this contamination without scratching as it glides over. Unlike traditional detailing clay, you can rinse the surface of the Opti-Eraser and reuse, even if you drop it on the ground!

To test your car for paint contamination wash it thoroughly and rub your hand over the dry surface. Your paint should feel smooth and glass-like. If you feel any grit or pebble like texture your paint is contaminated and should be cleaned prior to polishing, waxing, or sealing. Optimum recommends using diluted Optimum No Rinse Wash & Shine as a lubricant. Dilute 2 ounces of No Rinse Wash & Shine into1 gallon to create a high-lubricity lubricant.

Always decontaminate your paint one section at a time. Spray an adequate amount of lubricant on the section and lightly glide the Optimum Opti-Eraser back and forth over the surface. Initially you will feel the slight bumps caused by the contamination. Continue working until the paint feels smooth and the Opti-Eraser glides without dragging. Wipe the surface dry with a soft microfiber towel and repeat until the entire vehicle has been cleaned.

The Optimum Opti-Eraser is available in two grades -Aggressive and Fine-. Use the white colored Aggressive Grade Optimum Opti-Eraser to remove severe contamination quickly. Use this, the pink colored Fine Grade Optimum Opti-Eraser for removing light contamination from delicate paints.

Do not store wet or damp.

People who purchased this product also bought:

Ultima Paint Prep Plus Pre-wax Polish
Polishes & smoothes away swirl marks. Increases paint gloss & slickness.
(2 Reviews)

Product Reviews

Optimum Opti-Eraser – Fine Grade
4.5 Stars based on 2 Review(s)
San Diego, CA
4 Stars
I would recommend this item to a friend.

Easy to use, no tactile feedback
October 7, 2015
I've used traditional clay in the past and I'm use to feeling the surface turn rough to smooth to know when the contaminants are gone but there's no such feedback with this. Just did several passes to ensure I got most of it. Otherwise it was very easy to use, fits well in the hand. I like how I'm able to clean it off if I drop it. I only used it on glass so far so can't comment on if it marrs paint but seems very gentle.
Easy to use Faster than traditional clay Ability to clean if dropped
No tactile feedback to tell if surface has been decontaminated

5 Stars
I would recommend this item to a friend.

Best thing since sliced bread!
September 10, 2013
I've always been a huge fan of clay bars, I mean, who isn't. After reading some reviews of the Opti-Eraser, I decided to give it a shot. It was unbelievably easy, and did a fantasic job of getting all oxidation off the paint. It glides easier than the clay bar, and I love the fact that dropping it on the ground isn't a game ender. When it falls, I just rinse off, and go back to work. I would highly recommend this!
easy to use longevity