Nanoskin Rain Plus Hydrophobic Glass Treatment creates a tough glass coating that repels oil and water for 12 to 18 months! Nanoskin Rain Plus Hydrophobic Glass Treatment is exceptionally clear and maintains crystal clear vision while dramatically improving wet weather visibility. Apply Nanoskin Rain Plus Hydrophobic Glass Treatment to all of your exterior glass to keep your vision clear regardless of Mother Nature’s plans.
Nanoskin Rain Plus Hydrophobic Glass Treatment uses advanced hydrophobic polymer technology in a multi-part process to build a tough coating on exterior class. This coating is so powerful that the ingredients must be stored separately and mixed prior to use. Once applied to glass and cured, Nanoskin Rain Plush Hydrophobic Glass Treatment will cause water to bead up and run from the surface. Hydrophobic means “water fearing”, and there is no better way to guarantee clear vision regardless of conditions than to make water scatter. This coating repels oil which prevents stubborn road film from accumulating on the surface. Rain Plush also makes for easy removal of ice, frost, salt, mud, and bugs!
Apply Nanoskin Hydrophobic Glass Treatment to clean glass. Start by pouring PART A into PART B and shake for 60 seconds. Mist Nanoskin Activator, included in the kit, over the glass evenly, then glide a cleansing sponge back and forth to remove any bonded contamination. Wipe off Activator with a dry clean lint-free microfiber towel. Mist PART A & PART B Mixture onto the glass and spread evenly with the included non-woven applicator. Allow the product to cure for 15 minutes. Wipe off the haze with a clean dry lint-free microfiber towel.
Note: Once mixed, the shelf life of PART A & PART B is only 24 hours.
4 oz. Activator
15 ml Rain Plus PART A
15 ml Rain Plush PART B
16” x 16” Microfiber Towel x 2
Nitrile Gloves x 1 Pair