Start each polishing session off the right way!
Lubricated formula softens and prepares pads for polishing
Reduces the amount of polish needed to prime polishing pads
Reduces chatter, skipping, and pad hopping on start-up.
Marine 31 Spray Polishing Pad Conditioner is a highly-lubricated formula that penetrates into the pad to prolong its life while increasing the polish's performance. Marine 31 Spray Polishing Pad Conditioner coats the pores or fibers of your polishing pad with a high-slip lubricant that wards off pad contamination while extending your buffing cycle. Marine 31 Spray Polishing Pad Conditioner is harbor-safe and eco-friendly.
Much like your boat's engine, most polishing pad wear occurs when it is first “started up.” As your polishing pad warms up it becomes softer, more flexible, and more willing to contour to the surface without tearing. Marine 31 Spray Polishing Pad Conditioner softens the foam structure and provides ample lubrication to greatly reduce pad wear.
Marine 31 Spray Polishing Pad Conditioner allows your polish to flow over the polishing pad surface more completely, reducing the amount of polish needed to prime the pad. You get maximum results as soon as you start polishing. Marine 31 Spray Polishing Pad Conditioner will work with any brand of gel coat polish or compound and increase its performance.Directions:
- Spray 1 to 2 light mists over the face of the pad prior to polishing or compounding.
- When working on heavily oxidized finishes, apply 2 to 3 mists per section.
A Word From the Captain's Chair: Marine 31 Spray Polishing Pad Conditioner will save you money! Just one mist on your polishing pad will greatly reduce the amount of polish needed to prime the pad for maximum results and will greatly reduce pad wear. Use this product when working on heavily oxidized surfaces to flush the surface and keep the pad at peak performance! Anchors up!