Paste formula clings to vertical surfaces!
Acid-Free, pH-balanced iron remover that is paint safe.
Removes ferrous metals that penetrate the surface.
Excellent at removing baked on brake dust as well.
Iron X Paste by CarPro is an acid-free, pH-balanced iron remover that decontaminates auto paint and wheels. Iron X Paste has a long dwell time to work as long as needed to remove iron and brake dust spots. Airborne chemical compounds and ferrous (iron-containing) particles penetrate auto paint and create corrosive compounds that eat into the paint's sublayers. Detailing clay removes the particles but it doesn't remove their effects - corrosion may already be creeping under the paint's surface.
The only way to truly remove ferrous particles is with a dedicated iron remover like Iron X Paste. Iron X Paste opens up the paint's pores to release iron particles and to neutralize the caustic compounds that have developed as a result of the particle. In one step, you can eliminate the cause and its effects. Put an immediate stop to paint damage before it's too late.
Iron X Paste is excellent on automotive paint and safely cleans clear coats. Iron X Paste is highly recommended for all clear coated alloy wheels. Brake dust and road grime become baked onto wheels. Brake dust contains high levels of iron and can quickly pit clear coated wheels. Iron X Paste easily removes ferrous brake dust to protect your wheels from further damage. Iron X Paste can save you the cost of replacing your factory wheels!
: Iron X Paste should not be used on chrome, bare metal parts, brake calipers, wheel balancing weights, or SMART paint repairs. Mask off these areas. Avoid letting Iron X dry on any surface.
Iron X Paste is easy to use and you can see it working! Iron X Paste turns purple when it comes into contact with sintered iron particles. Iron X Paste turns the iron into a water soluble complex for easy removal. After five minutes of dwell time, wipe down the surface and rinse thoroughly. After using Iron X, you can polish and clay your vehicle as you normally would. Always apply a coat of wax or paint sealant after using Iron X Paste.Directions:
1)Wash the car or wheels surfaces, make sure surface is in cool temp.
2)Apply Iron X Paste to contaminated areas. Wait 5 min. while contaminants change its color to purple/red. Wipe off with damp soft sponge. Don’t let the IronX Paste dry completely on surface!
3)Rinse well or power wash the whole surface. The vehicle is ready to clay now.