Aquapel Glass Treatment - Case of 6
Dramatically improves visibility in rain and forms a chemical bond with automotive glass — unlike other products that simply coat.
New single applicator pack
Used by professionals
Lasts up to six months
When AQUAPEL ® Glass Treatment is applied to the exterior of vehicle glass, it leaves the surface water resistant. Rain beads up and rolls off, dramatically improving visibility—day and night.
One application lasts up to six months—six times longer than other products.
How it Works
Using technology innovated for the aviation industry, Aquapel Glass Treatment forms a chemical bond with the glass which increases water repellency, causing water to bead and easily shed off the glass. These fluorinated compounds apply in just minutes to a clean, dry windshield or any exterior glass surface, and lasts up to 6 times longer than silicone-based products.
Additionally, Aquapel Glass Treatment remains highly effective after months of normal use, including heavy rain and snow, car washing, glass cleaning and salt spray.
How to use Aquapel
Aquapel® Glass Treatment was developed by PPG Industries, leaders in glass technology. When applied to a vehicle windshield, this innovative product improves vision in the rain, day and night. Aquapel forms a chemical bond with glass, unlike other products that simply coat glass. As a result, Aquapel can last up to 6 times longer than other products. One application can last for months!
Step 1: Clean Thoroughly clean and dry the glass.
Step 2: Apply Hold the applicator between the thumb and fingers with the pad down and level over the windshield. Squeeze the wings together until a popping sound is heard and liquid is released onto the pad. Use immediately.
Wipe the soft pad of the applicator over the glass up and down then side to side to ensure the glass is well covered. Avoid painted surfaces. Remove liquid from non-glass surfaces with dry paper towel.
Step 3: Dry Wipe the glass with a clean dry paper towel immediately after Aquapel has been applied to the entire windshield. Dispose of applicator and paper towel. Failure to wipe immediately may cause hazing that requires additional buffing with a clean dry paper towel.
Note: One single-use applicator will treat one windshield or two side windows.
•Do not let Aquapel air dry onto windshield.
•When applying to large surface areas treat and dry one half at a time.
•Application conditions: Do not use in temperatures colder than 50º F or hotter than 90º F or in excessively humid conditions.
•Once applied, Aquapel® Glass Treatment can be reapplied as needed.
•Cleaning glass with ordinary glass cleaners will not affect product durability.
Overall Rating for Aquapel Glass Treatment - Case of 6